Skip to main content

Set up GitHub pull request comments

Your deployment journey

Semgrep can create pull request (PR) comments in your GitHub repository. These comments provide a description of the issue detected by Semgrep and may offer possible solutions. These comments are a means for security teams, or any team responsible for creating standards to help their fellow developers write safe and standards-compliant code.

Automated comments on GitHub pull requests are displayed as follows:

Screenshot of a GitHub PR comment Figure An inline GitHub pull request comment.

Conditions for PR comment creation

PR comments appear for the following types of scans under these conditions:

Type of scanProduct nameTrigger conditionHow to set up
Static application security testing (SAST)Semgrep CodeA comment appears when a finding is generated by a rule in Comment or Block mode. This means you can fully customize what comments your developers receive.Complete the steps in the following sections:
  1. Confirm your Semgrep account's connection and access to your source code manager.
  2. Configure comments for Semgrep Code.
Software composition analysis (SCA)Semgrep Supply Chain (SSC)A comment appears only when the finding is reachable.Complete the steps in Confirm account connection and access.
SecretsSemgrep SecretsA comment appears on validated secrets.This product is in beta.
Contact support@semgrep.com to enable comments.

Comments from Supply Chain scans include the following information:

Risk
A description of the vulnerability, including the types of attack it is vulnerable to.
Fix
Indicates what versions to upgrade to, if any, that resolves or eliminates the vulnerability.
Reference
A link to additional information about the vulnerability from GitHub Advisory Database and the National Vulnerability Database (NVD), if available.
info

Pull or merge requests with vulnerabilities detected by SSC are not blocked from merging.

Steps to set up PR comments

Prerequisites

In addition to finishing the previous steps in your deployment journey, it is recommended to have completed a full scan on your default branch for the repository in which you want to receive comments.

Confirm your Semgrep account's connection

Confirm that you have the correct connection and access:

  1. In your Semgrep AppSec Platform account, click Settings > Source code managers.
  2. Check that an entry for your GitHub org exists and is correct.

Confirm repository access

Ensure that Semgrep's GitHub app (semgrep-app) has sufficient permissions to post PR comments:

  1. Navigate to your semgrep-app settings:
    1. For personal accounts, navigate to the following URL https://github.com/settings/installations.
    2. For organization accounts, navigate to the following URL, substituting YOUR_ORG_NAME with the name of your account: https://github.com/organizations/YOUR_ORG_NAME/settings/installations.
  2. On the semgrep-app row, click Configure.
  3. Check that you have granted the following permission: Read and write access to actions, pull requests, secrets, security events, and workflows.
  4. Under Repository access, check that you have included the repositories that you added to Semgrep AppSec Platform. Review the following examples:

Semgrep GitHub app permissions: all repositories Figure Permissions for all repositories.

Semgrep GitHub app permissions - select repositories Figure Permissions for select repositories. Ensure the repositories you have onboarded to Semgrep AppSec Platform are selected.

For GitHub Actions users, no further steps need to be undertaken. Continue setting up Semgrep Code PR comments by setting rules to Comment or Block mode.

Required environment variables

For CI providers aside from GitHub Actions, additional environment variables must be set:

These values do not have to be fixed or hardcoded. They can be variables passed to the job. For more information, see Sample CI configurations.

Configure comments for Semgrep Code

In addition to setting up the connection between Semgrep and GitHub, you must assign rules to Comment or Block mode. This customization enables you to:

  • Manage the amount of PR comments your developers receive.

  • Ensure that only rules that meet your criteria, such as high severity or high confidence rules, produce comments visible to developers, reducing noise.
tip

Rules in Block mode fail the CI job that runs on the PR. Depending on your workflow, this may prevent your PR from merging.

Set rules to Comment or Block mode

The following instructions let you customize what findings or security issues your developers see as comments in their PRs:

  1. In your Semgrep AppSec Platform account, click Rules > Policies. You are taken to the Policies page. Under Modes , you can quickly see if you have existing rules in either Comment or Block mode.
  2. Optional: Use the filters to quickly find rules to set to Comment or Block.
  3. Click the checkbox of the rules you want to set. You can use Ctrl + Click to select rules in bulk.
  4. Click Change modes.
  5. Click either Block or Comment.

You have successfully configured PR comments for Semgrep Code.



If you are using GitHub Actions to run Semgrep, no extra changes are needed to receive PR comments.

Receive comments in your VPN or on-premise SCM

To enable comments within self-hosted SCMs behind firewalls or VPNs (Virtual Private Networks):

  1. Add the following IP addresses to your VPN's ingress allowlist and egress allowlist, if you have one.
    # These IP addresses are inbound and outbound:
    35.166.231.235
    52.35.248.246
    52.34.137.110
    44.225.64.41
  2. Test that you are able to receive findings by manually triggering a scan through your CI provider.

Receiving PR or MR comments may require additional steps depending on the custom configuration of your VPN or SCM (for example, if you use a static IP without a hostname). Reach out to Semgrep support through the Semgrep Community Slack or send an email to support@semgrep.com for any concerns.

You've set up PR comments! Enable optional features provided in the following sections, or see Next steps.

Optional features

Enable autofix in GitHub repositories

Autofix is a Semgrep feature in which rules contain suggested fixes to resolve findings.

To enable autofix for all projects in your Semgrep AppSec Platform organization, follow these steps:

  1. In Semgrep AppSec Platform, click Settings on the left sidebar.
  2. Click Autofix toggle.

Dataflow traces in PR comments

Screenshot of a GitHub PR comment with dataflow traces Figure An inline GitHub pull request comment with dataflow traces.

With dataflow traces, Semgrep Code can provide you with a visualization of the path of tainted, or untrusted, data in specific findings. This path can help you track the sources and sinks of the tainted data as they propagate through the body of a function or a method. For general information about taint analysis, see Taint tracking.

When running Semgrep Code from the command line, you can pass in the flag --dataflow-traces to use this feature.

You can view dataflow traces in:

Get cross-file findings

To get cross-file (interfile) findings in your organization, follow the steps in Perform cross-file analysis.

View the path of tainted data in PR comments

To enable dataflow traces feature in your CI pipeline, fulfill the following prerequisites:

Prerequisites
  • Set up Semgrep to post GitHub PR comments, as described on this page.
  • To obtain meaningful results of dataflow traces in PR comments, use cross-file analysis while scanning your repositories. To enable cross-file analysis, see Perform cross-file analysis.
  • Not all Semgrep rules or rulesets make use of taint tracking. Ensure that you have a ruleset that does, such as the default ruleset, added in your Policies. To add this ruleset, navigate to https://semgrep.dev/p/default, and then click Add to Policies.
  • You can add additional rules that use taint tracking from Semgrep Registry.

Prevent developers from merging a PR with a reachable vulnerability

Both GitHub and GitLab provide features to prevent or block a PR or MR from merging based on certain conditions. Refer to the links below to prevent PRs or MRs from merging when a reachable finding is detected:

GitHubRequire conversation resolution before merging
GitLabPrevent merge unless all threads are resolved

Disable PR comments for Supply Chain findings

By default, Semgrep comments include both Semgrep Code and Semgrep Supply Chain (SSC) findings information. However, if you would like to disable PR or MR comments for reachable SSC findings, you can do so as follows:

  1. Sign in to Semgrep AppSec Platform.
  2. Go to Settings > Deployment and navigate to the Supply Chain (SCA) section.
  3. Click PR/MR comments to disable commenting.

Disabling PR/MR comments doesn't disable notifications regarding license policy violations.

Next steps

You've finished setting up a core deployment of Semgrep 🎉.

Additional references


Not finding what you need in this doc? Ask questions in our Community Slack group, or see Support for other ways to get help.